Anvil Shock Rack Construction Features |
Anvil Portable Shock Mount Rack Shipping Cases Construction |
- Pre-tapped rack channel
- Standard E.I.A. rack spacing thoughout, with Pre-tapped 10/32 in. holes in zinc-plated steel channels
- Screws and gromments included
- Case inner shell is protected by 2 in. foam on all 4 sides
- Server racks may have rails with square holes
- For Dell and Compaq versa and rapid edge system racking
- 18 in. to 36 in. rack depth
- 2U to 30U rack height
- 19 in. standard rack width
- 23 in. telecommunications rack width available
- Caster boards extend out 3 in. under lids
- For added stability and ease of lid replacement
- 3/8 in. ATA outer wall – 3/8 in. ACK plywood laminated with ABS plastic – recommended for local use and 3 to 4 trips per year
- 3/8 in. Anvil iron outer wall – 1/4 in. ACK plywood laminated with high strength mica (polyolefin) plastic recommended for 5 to 6 trips per year
- 1/2 in. Anvil iron outer wall – 3/8 in. ACK plywood laminated with MICA (polyolefin) plastic recommended for 5 or more trips, large and/or deep rack cases / or whenever forklifts are often used
- Heavy duty wide track piano casters for easier transit over uneven surfaces like door jams and cables
|
Click to Enlarge
Anvil Shock Rack Case with Square Hole Rails for Computer Servers |
Options:
- Legs in the lids so they can be used as portable work tables
- Free standing tables using one lid with two sets of table legs
- Rear rails
- Venting
- Heavy duty rack glides
- Drawers (completely customizable)
- Accessory compartments in the lids
- Slide out keyboard & instrument shelves
- Fixed shelves
- Trap doors
- Multiple colors at no extra charge
- Stenciling for identification at no charge
- Custom design available with no charge for design or a quote
|
Click to Enlarge
Heavy Duty Casters, Foam Surround Shell, Square Hole Rails |
